Key Features:

• Very Loud 122 dB Output: High-intensity sound – produces approx. 122 dB @ 1m (13.8V DC), ensuring alarm signals carry over long distances. Helps attract attention and force intruders to retreat due to the pain-inducing volume
• Dual Tone (Yelp / Steady): Two tone options built-in. Steady is a continuous siren tone; Yelp is a warbling up-down tone. Select tone by wiring: connect positive to yellow for Steady, or red for Yelp (or use a two-channel output to drive both tones for separate purposes)
• Self-Contained & Pre-Wired: No separate driver module required – the siren driver is internal. Comes with pre-attached wires and mounting bracket for quick installation. Just run a 4-conductor cable (yellow, red, white, and black if including a second siren or strobe ground) from the panel’s bell output
• Outdoor Rated Housing: Rugged ABS plastic horn and housing, UL listed for exterior use. UV resistant white finish – built to last in sun exposure and harsh weather. Water-resistant design for mounting under eaves or directly on exterior walls (drain holes to prevent water accumulation)
• Easy Mount Bracket: Included metal bracket allows rotation and aiming of the horn. Pre-drilled holes on bracket for wall or soffit mounting. The siren itself then secures to the bracket with included hardware, simplifying the job.

Technical Specifications:

• Operating Voltage: 6–14 VDC (nominal 12V). Current Draw: ~1.1 A at 12V, 1.5 A at 14V (when sounding) – ensure panel’s bell output can supply sufficient current or use a relay with auxiliary power if needed
• Sound Output: 122 dB @ 1m @13.8V (approximately 120 dB @ 1m @12V). Warble frequency ~1,200–1,500 Hz for yelp tone. Very effective for intrusion and fire alarm use
• Tones: Steady (single high-frequency tone) and Yelp (rapid warble). Wiring: White = negative (–), Yellow = steady (+), Red = yelp (+). To get Steady tone, apply +12V to Yellow and –12V to White. For Yelp, apply +12V to Red and –12V to White
• Construction: 30 Watt horn speaker, metal mounting base. Overall dimensions ~8″ H × 4.7″ W × 9.6″ D (including horn length). Weight ~1.5 lbs. Color: White. UL Listed (UL 464) for audible signal appliance
• Installation: Designed for horizontal mount (horn opening pointing horizontally or downward slightly to avoid water ingress). Includes flying lead wires ~18″ long. Operating Temp: -20° to 60°C (-4° to 140°F). Warranty: Limited Lifetime (from Elk Products)